Jeep Wrangler 2014 Owner's Manual page 37

Hide thumbs Also See for Wrangler 2014:

Table of Contents

Hinge Pin Screw

3. Unplug the wiring harness connector under the instru-

ment panel by pressing the tab at the top of the

connector and pulling to disconnect.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35

NOTE: If the red latch on the connector is locked, pull

the red latch down. This will unlock the connector tab,

allowing the tab to be pressed down and enabling the

harness to be disconnected.

Chapters

Table of Contents

Do you have a question about the Wrangler 2014 and is the answer not in the manual?