Upper Half Door Window Installation - If Equipped; Front Door Removal - Jeep Wrangler 2014 Owner's Manual

Hide thumbs Also See for Wrangler 2014:
Table of Contents

Advertisement

34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Upper Half Door Window Installation — If
Equipped
1. Grasp the half door window and line up the pins with
the pockets in the lower door.
2. Push down to ensure the half door window is fully
seated.

Front Door Removal

WARNING!
Do not drive your vehicle on public roads with the
doors removed as you will lose the protection that
they can provide. This procedure is furnished for use
during off-road operation only.
Door Removal Warning Label
1. Roll down the glass window to prevent any damage.
2. Remove the hinge pin screws from the upper and lower
outside hinges (using a #T50 Torx® head driver).
NOTE: The hinge pin screws and nuts can be stowed in
the rear cargo tray located under the rear loadfloor.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wrangler 2014 and is the answer not in the manual?

Table of Contents