Table of Contents
Advertisement
5. With the Complete screen
displayed, click "Finish"
to exit the driver wizard.
Plug the converter into
an available USB 2.0
port of your PC or
notebook computer.
6. If installing a single
converter, select "Yes, I
want to restart my
computer now" and click
"Finish" to complete the
driver installation.
NOTE: If installing more
than one converter,
proceed to Step 7. After
rebooting the computer,
the extended display will
be shown on the second
display device.
7. If installing more than
one converter, select
"No, I will restart my
computer later" and click
"Finish" to continue with
the installation of the
second converter.
Connect the next display
device to the additional
converter's dVI
connector and switch it
on. Plug this additional
converter into another
USB 2.0 port on the computer; the driver will again proceed to install
automatically. Continue connecting up to six display devices and
converters as instructed above; or select "Yes, I want to restart my
computer now" (as shown in Step 6) and click "Finish." After each
reboot, the extended display will be shown on the display device.
INSTALLATION: WINDOWS 2000/XP
5
Advertisement
Table of Contents
