Table of Contents
Advertisement
4. A Windows Security
screen may appear,
but will not affect the
driver installation or
converter operation.
Select "Always trust
software..." and click
"Install" to continue.
5. Allow the program to
proceed while this
status screen displays...
6. Connect the external display device (monitor/projector) to the dVI
connector of the converter and switch it on.
7. When the InstallShield
Wizard Complete
screen displays, click
"Finish" to exit. Plug
the converter into an
available USB 2.0 port
on the computer.
8. If installing a single
converter, select "Yes, I
want to restart my
computer now" and click
"Finish" to complete the
driver installation.
NOTE: If installing more
than one converter,
proceed to Step 9. After
rebooting the computer,
the extended display will
be shown on the second
display device.
9. If installing more than one converter, select "No, I will restart my
computer later" and click "Finish" to continue with the installation of
the second converter. Connect the next display device to the
10
INSTALLATION: WINDOWS VISTA
Advertisement
Table of Contents
