Changing The Intensity Level Of Stimulation - Einstein E-Collar ET-302TS Owner's Manual

CHANGING THE INTENSITY LEVEL
It is highly recommended that the user practices changing levels
and modes before putting the collar receiver on the dog.
Setting the correct stimulation level for your dog is very important.
To set your "conditioning" stimulation level, put the collar receiver
(see page 23 for proper fitting technique) on your dog. Let him/
her get used to the collar receiver for a couple of hours. While
watching your dog, turn the level to "0" and press the stimulation
button (1D/2D).
Slowly turn the stimulation up at a rate of approximately 2-3
levels per second. When your dog first perceives the stimulation,
usually between 15 and 40, release the button. This is your
"conditioning" stimulation level. You may need to add a few
levels later as your dog becomes more conditioned to the
stimulation. The "conditioning" stimulation is used when the
trainer wants to use the stimulation in continuous mode.
OF STIMULATION
Rotating clockwise increases
the stimulation level and
conversely, rotating counter-
clockwise lowers the
stimulation level.
Einstein Owner's Manual ET-302TS
15