Einstein E-Collar ET-302TS Owner's Manual page 14

13
BUTTON FUNCTIONS
Mode Button "M"
- Mode Button allows the user to change modes, cycling between 1D Mode
to Tapping Sensation Mode , Tapping Sensation Mode to 2D Mode, 2D Mode to
, and Tapping Sensation mode to 1D Mode as shown
Tapping Sensation Mode
in the diagram.
1 Dog Mode Tapping Sensation Mode 2 Dog Mode Tapping Sensation Mode
- In 1D Mode, you can change the intensity level of 1D by rotating the
dial and locking it. (See "LOCK/UNLOCK THE STIMULATION INTENSITY
LEVEL" for details) The intensity level of 2D will be same as that of 1D
unless it is locked.
- In Tapping Sensation Mode, you can send only a tapping sensation to
each collar receiver. We purposely made it easy to switch back and forth
from tapping sensation to stimulation with one button control.
- In 2D Mode, you can change the intensity level of 2D by rotating the dial
and locking it. The intensity level of 1D will be same as that of 2D unless it
is locked.
Stimulation Button (1D)
- In 1D Mode, you can jump to 2D Mode by pressing 2D Stimulation Button
and vice versa.
- In 1D/2D Mode, Sends momentary or continuous stimulation to the Dog 1
collar receiver based on the state of Momentary/Continuous Button.
- In Tapping Sensation Mode, Sends a tapping sensation to the Dog 1 collar
receiver.
- If the current mode is 2D Mode, the mode will be changed to 1D Mode by
pressing 1D Stimulation Button.
Einstein Owner's Manual ET-302TS