Einstein E-Collar ET-302TS Owner's Manual page 15

14
BUTTON FUNCTIONS
Stimulation Button (2D)
- In 1D/2D Mode, Sends momentary and continuous stimulation to the Dog 2
collar receiver based on the state of Momentary/Continuous Button.
- In Tapping Sensation Mode, Sends a tapping sensation to the Dog 2 collar
receiver.
- If the current mode is 1D Mode, the mode will be changed to 2D Mode by
pressing 2D Stimulation Button.
Light Button "L"
- When pressed less than 0.5 seconds, it will turn On or Off the high
intensity night tracking light.
* In 1D Mode, it will turn ON/OFF Dog 1 collar receiver light.
* In 2D Mode, it will turn ON/OFF Dog 2 collar receiver light.
* In Tapping Sensation Mode, Light ON/OFF Function is disabled.
* 1st pressing will make the collar receiver light flashing.
* 2nd pressing will make the collar receiver light turned on solid.
* 3rd pressing will make the collar receiver light turned off.
* When the button is pressed, "L" will be displayed.
- When pressed for more than 2 seconds, it will turn On or Off the
transmitter.
Momentary/Continuous Button
- M/C Button on the backside of the transmitter allows the user to
switch between Momentary Stimulation and Continuous Stimulation.
- If Continuous Stimulation is selected, pressing stimulation buttons (1D or
2D) will send stimulation to the collar receiver for the duration of the button
being pressed. After 10 seconds the Over-Stimulation feature will stop the
stimulation until the button is released and pressed again.
Einstein Owner's Manual ET-302TS