Selecting A Conventional Zone And Channel; Sending A Conventional Call - Motorola EX600 XLS User Manual

SELECTING A CONVENTIONAL ZONE
AND CHANNEL
Up to 160 conventional channels, in one or more
conventional zones, can be programmed into
your radio.
To select a conventional zone and channel
Note: The selection of zones can be prorgrammed by
1 Use the Zone/Channel Selector knob to
select the appropriate conventional zone.
2 + or ? until you see the desired
conventional channel on the display.
–or–
1 ) to enter menu mode.
2 + or ? until
3 ) to select
4 + or ? until you see the desired zone on
the display.
5 ) to select the desired zone.
30
English
your dealer either on the Zone/Channel
Selector knob or via the menu keys.
Zone
Zone
6 + or ? until you see the desired
conventional channel on the display.

SENDING A CONVENTIONAL CALL

Note: In the United States, FCC regulations require
you to monitor the conventional channels
before sending a call. The monitor feature
(see page 21) can be accessed through one
of your programmable buttons.
To send a conventional call
1 Turn your radio on.
2 Select the desired channel (see "Selecting a
Conventional Zone and Channel").
3 Hold the radio in a vertical
position at a distance of about
1 to 2 inches (2.5 to 5 cm)
from your mouth.
4 Press the PTT button and speak clearly into
the microphone. The LED indicator lights
steady red while the call is being sent.
5 Release the PTT button to listen.