Control Panel - Panasonic NN-GS597M Operating Instructions Manual

Control Panel

Display Window
Sensor Reheat/
Steam Reheat Pad
(page 15, 16)
Steam Defrost Pad
(page 13)
Steam & Micro Power Pad
(page 12)
Micro Power Pad
(page 10)
Heater Selection Mode
Pad (page 18)
Steam Shot Pad
(page 12)
Timer/Clock Pad
(page 9, 21)
Stop/Reset Pad
Before cooking: One tap
clears your instructions.
During cooking: One tap
temporarily stops the cooking
process. Another tap cancels
all your instructions and colon
or time of day appears in the
Display Window.
Beep Sound:
When a pad is pressed correctly, a beep sound will be heard. If a pad is pressed and no beep is heard, the unit
did not or could not accept the instruction. The oven will beep twice between programmed stages. At the end
of any completed program, the oven will beep 5 times.
Note:
If no operation during program setting or cooking program pausing, 6 minutes later the oven will automatically
cancel this setting. The display will revert back to clock or colon mode.
IP1589_38S80KP_Eng_06_071227.indd 7 IP1589_38S80KP_Eng_06_071227.indd 7
- Eng-7 -
* When "DEMO MODE PRESS
ANY KEY" appears in the
display window, it means the
oven is under demonstration
mode, microwave doesn't
emit. To set or cancel this
mode, please refer to page 27.
Menu/Power/Temp. Dial*
* To be "More" or "Less" Dial
when using Steam Reheat.
Time/Weight Dial
Prompt Light
Twinkling to prompt next
operation.
Start Button
After setting, one tap allows
oven to begin functioning. If
door is opened or Stop/Reset
pad is pressed once during
oven operation, Start button
must again be pressed to
restart oven.
Water Tank
(for steam function)
2007-12-27 Good Tom 15:50:09 2007-12-27 Good Tom 15:50:09