Heater Selection Mode Setting - Panasonic NN-GS597M Operating Instructions Manual

Heater Selection Mode Setting

This feature provides 3 modes to select.
Oven Setting
Oven can set temperature from 110 to 220 degree. Heat radiate from light-wave pipe on the top of cavity and quartz pipes
under the ceramic plate. It's particularly for cake, pizza etc. Put the food on the crispy pan, set the proper temperature and
time, then start.
Without Preheating:
1. Press once.
With Preheating:
1. Press once. 2. Set the desired
temperature by using
Menu/Power/Temp.
dial.
E.g.: Frozen Pizza
Ingredient: Frozen Pizza 9 inches
(about 400 g)
IP1589_38S80KP_Eng_06_071227.indd 18 IP1589_38S80KP_Eng_06_071227.indd 18
2. Set the desired
temperature by using
Menu/Power/Temp. dial.
3. Press Start button
to start preheating.
1. Take out the pizza from the
refrigerator and put on the crispy
pan without defrosting.
2. Press Heater Selection Mode pad
once.
3. Turn Menu/Power/Temp. dial
until 200°C appears in the display
window.
- Eng-18 -
3. Set the desired cooking
time by using Time/
Weight dial.
(up to 90 minutes)
After preheating,
put the food into oven
immediately
4. Set the desired
cooking time by using
Time/Weight dial.
(up to 90 minutes)
4. Press Start button to begin
preheating.
5. Open the door when the oven beep
3 times, put the crispy pan with
pizza on the support shelf quickly.
6. Set time for 10 to 12 minutes.
7 Press Start button to start cooking.
4. Press Start button.
The cooking time appears
in the display window and
begins to count down.
5. Press Start button.
The cooking time
appears in the display
window and begins to
count down.
2007-12-27 Good Tom 15:50:11 2007-12-27 Good Tom 15:50:11