Before Requesting Service - Panasonic NN-GS597M Operating Instructions Manual

Before Requesting Service

PROBLEM
Oven will not turn on.
Oven will not start cooking.
"HOT" appears in the display
window.
"U14" appears in the display
window.
"H00" or "H02" appears in
the display window.
"DEMO MODE PRESS ANY
KEY" appears in the display
window.
The " " and "
appears in the display
window.
The oven stops cooking by
microwave and "H97" or
"H98" appears in the display
window.
If it seems there is a problem with the oven, contact an authorized Service Center.
IP1589_38S80KP_Eng_06_071227.indd 27 IP1589_38S80KP_Eng_06_071227.indd 27
POSSIBLE CAUSE
The oven is not plugged in securely.
Circuit Breaker or fuse is tripped or
blown.
There is a problem with the outlet.
The door is not closed completely.
Start button was not pressed after
programming.
Another program has already been
entered into the oven.
The program has not been entered
correctly.
Stop/Reset pad has been pressed
accidentally.
The cavity is overheated.
The water tank is empty.
The oven is defected.
The oven is under demonstration
mode.
"
The Child Lock was activated by
pressing Start button 3 times.
This displaying indicates a problem
with the microwave generation
system.
Remove plug from outlet, wait 10 seconds
and re-insert.
Contact the specified service center.
Plug another appliance into the outlet to
check if the outlet is working.
Close the oven door securely.
Press Start button.
Press Stop/Reset pad to cancel the
previous program and program again.
Program again according to the Operating
Instructions.
Program oven again.
Operate again after it cools down.
Full it with water.
Contact the specified service center.
Press Timer/Clock pad 4 times to exit the
mode.
Deactivate Lock by pressing Stop/Reset
pad 3 times.
Please contact an authorised Service
Center.
- Eng-27 -
REMEDY
2007-12-27 Good Tom 15:50:13 2007-12-27 Good Tom 15:50:13