Universal Repeater
Repeater is used to regenerate or replicate signals that are weakened or distorted by
transmission over long distances and through areas with high levels of electromagnetic
interference (EMI). Universal Repeater (AP) mode on one radio channel is usually
configured along with Universal Repeater (STA) mode on another radio channel.
Please refer to:
Chapter
2.2.3 Universal Repeater Configuration
Mode
2.1.2. Status
System: Basic information of the device.
WLAN Settings: WLAN channel.
SSID_1: SSID information.
(Page. 27)
for operation under Repeater
4