LevelOne WAP-6102 User Manual page 42


Bridge Type: Select Static IP or Dynamic IP from the drop-down list. If you select
Static IP, you will be required to specify an IP address and subnet mask. If Dynamic
IP is selected, then the IP address is received automatically from the external DHCP
server.

IP Address: Specify an IP address.

IP Subnet Mask: Specify a subnet mask for the IP address.

Default Gateway: Specify the router IP address which is used to route TCP/IP
traffic destined to other network/subnet addresses not listed in local routing table.

DNS Type: Select Dynamic for automatic retrieve DNS IP address or select Static
for manually defined.

First DNS Address: Specify the primary DNS IP address.

Second DNS Address: Specify the secondary DNS IP address.

802.1d Spanning Tree: Select Enable or Disable from the drop-down list. Enabling
spanning tree will avoid redundant data loops.

DHCP server: You may Enable of Disable DHCP server.

Lease Time: Define the maximum usage.

Start IP: Specify the first IP address for the DHCP range.

End IP: Specify the last IP address for the DHCP range.

Domain Name: Specify the last IP address for DHCP range.

First DNS Address: Specify the primary DNS IP address for DHCP server.

Second DNS Address: Specify the secondary DNS IP address for DHCP server.
38