LevelOne WAP-6102 User Manual page 15


Radio: To enable/disable radio frequency.

Mode: Select and define your device in AP mode or WDS mode
 Mode: AP
To define your AP as a regular AP
 Mode: WDS (AP+WDS)
To define your device work in WDS + AP function, this mode is to interlink this device with
other AP devices in Wireless Distribution System. Once you select this mode the table as
below will shows up.
You are allowed to set MAC address and encryption algorithm

Set Security: (Please refer to

Band: Configure the device into different wireless modes.
 2.4 GHz (B)
 2.4 GHz (N)
 2.4 GHz (B+G)
 2.4 GHz (G)
 2.4 GHz (B+G+N)

Enabled SSID#: The device allows you to add up to 4 unique SSID

ESSID#: Description of each configured SSID

Auto Channel: To enable/disable devices auto-detect channel used

Check Cannel Time (Channel): When Auto Channel is enabled; you can configure the channel
detection interval. When Auto Channel is disabled; you can manually configure a channel to be
used.
Security in Page. 25 for encryption configuration)
11