LevelOne WAP-6102 User Manual page 22

 Encryption: WPA RADIUS

ESSID Selection: As this device supports multiple SSIDs, it is possible to configure a different
security mode for each SSID (profile). Select an SSID from the drop-down list.

Broadcast SSID: Select Enable or Disable from the drop-down list. This is the SSID broadcast
feature.
When this option is set to Enable, your wireless network name is broadcast to anyone within the
range of your signal
this is disabled, you must enter the Wireless Network Name (SSID) on the client manually to
connect to the network.

WMM: Choose to Enable or Disable WMM. This is the Quality of Service (QoS) feature for
prioritizing voice and video applications.

Encryption: Select WPA RADIUS from the drop-down list.

WPA Type: Select TKIP, AES, or WPA2 Mixed. The encryption algorithm used to secure the
data communication. TKIP (Temporal Key Integrity Protocol) provides per-packet key
generation and is based on WEP. AES (Advanced Encryption Standard) is a very secure block
based encryption. Note that, if the bridge uses the AES option, the bridge can associate with the
access point only if the access point is also set to use only AES.

RADIUS Server IP Address: Specify the IP address of the RADIUS server.

RADIUS Server Port: Specify the port number of the RADIUS server, the default port is 1812.

RADIUS Server Password: Specify the pass-phrase that is matched on the RADIUS Server.
. If you're not using encryption then they could connect to your network. When
18