Switching The Monitor On/Off - Fujitsu Siemens Computers SCALEOVIEW S17-2 Operating Manual

SCALEOVIEW S17-2/S19-2/S20-1W

Switching the monitor on/off

The ON/OFF switch (3) is used for switching the monitor on and off.
The power indicator (2) lights up blue when the monitor and computer are switched on. The power
indicator lights up orange when the monitor does not receive a video signal or is in the energy saving
mode. The power indicator goes off when the monitor is switched off.
When you switch the computer system on, you must proceed in the following order:
► First switch on the LCD monitor with the ON/OFF switch (3).
► Then switch on the computer.
If your computer has a power management function (energy-saving mode), you should
i
read the "Notes on power management" section in this chapter.
14
1 2 3
1 = Buttons for the OSD menu
(On-Screen-display)
2 = Power indicator
3 = ON/OFF switch
A26361-K1018-Z120-1-7619, edition 2