Connecting Cables To The Computer - Fujitsu Siemens Computers SCALEOVIEW S17-2 Operating Manual

SCALEOVIEW S17-2/S19-2/S20-1W
► Connect the angled plug of the data cable to the DVI connection socket (2) or the D-SUB
connection socket (7 only for model S20-1W) on the monitor, and secure the connection by
tightening the securing screws.
► Plug the mains adapter cable into the power connector (1) of the monitor.
► Firmly insert the socket with the power cable supplied into the power cable connection of the
mains adapter and check whether the socket is securely seated.
A lock (Kensington Lock) can be mounted in the security slot (6) to protect the monitor
i
from theft. A Kensington Lock is not included in the consignment of the monitor.

Connecting cables to the computer

Information on the computer connections and interfaces is contained in the operating manual for your
computer.
If your computer has two monitor ports ("onboard" screen controller and separate
i
graphics card), the monitor port for the separate graphics card is usually active.
► Connect the even connector of the data cable to the active monitor port on the computer and
secure the plug-in connection by tightening the safety screws.
► Connect the connector of the power cable supplied into a properly earthed mains outlet and
ensure a secure connection.
► Plug the power connector of the computer into a properly grounded mains outlet.
When you start working with your monitor for the first time you should install the
i
appropriate graphics drivers for your application software. Details of how to do this are
provided in the documentation on your screen controller/the associated driver software.
12 A26361-K1018-Z120-1-7619, edition 2