To Adjust General Settings; General Settings - Cobra CDR 840 User Manual

Adjusting Camera Settings
Your Dash Cam

To Adjust General Settings

NOTE: If you are currently recording video (
need to stop recording with the OK button first.
While in VIDEO or STILL PHOTO mode, press the
MENU button once to enter the menu selection
screen. Press the down arrow until General Settings
is highlighted, then press OK to confirm.
Press the UP and DOWN arrows to select the setting
you'd like to modify, then press the OK button to
confirm.
A window on the right edge of the screen will display
the available options. Use the UP and DOWN arrows
to make your selection, then press OK to confirm.
A list of the settings and their meanings are shown on the
next page.
16 English
•
) you'll
Adjusting Camera Settings
Your Dash Cam

General Settings

If you don't want the device to beep on every button press, turn
Beep Sound
this option OFF.
Once power is removed from the device, it automatically shuts
Idle Power Off down. This option lets you set how many seconds to wait before
shutting down.
Date/Time
Use this to set the current time and date.
Date Format Sets the date format.
TV System Lets you choose between NTSC (United States) and PAL (Europe)
HDMI Output Lets you choose between 720P and 1080P on the HDMI Output.
Screen Flicker This sets the screen refresh rate. Options include 50 Hz and 60 Hz.
If you want your camera to behave like a Mass Storage device
USB Function (flash drive) when connected to a computer, select MSDC. If you
want to use it as a webcam with your computer, select PCAM.
Screen Rotate Allows you to flip the screen vertically for upside-down operation.
Allows you to set a timeout for the screen to go black when not in
Screen Saver
use. Options include 1 minute and 3 minutes.
G-Sensor Level Sets the sensitivity of the G-Sensor, from 0 (off) to 4 (max)
Motion Detector Sets the sensitivity of the Motion sensor, from 0 (off) to 3 (max)
This allows you to view the raw data from the GPS sattelites that
GPS Status
are available in your area.
Time Zone Select Set the time zone you're currently in.
Restore Defaults Resets the system to its default settings.
If you want to completely erase all the movies and files on the SD-
Format SD-Card
card, select this option. Be careful; all your data will be lost.
SD-Card INFO See how much space remains on the SD Card.
FW Version Get the firmware version information.
17