Device Operation; Powering The Device On And Off; Inserting And Removing The Memory Card; Video Record, Still Photo & Playback Modes - Cobra CDR 840 User Manual

Device Operation

Your Dash Cam
for purchasing Drive HD, by Cobra.

Powering the Device On and Off

810 is a 1080P HD Digital Video Recorder and
To turn the device on, press the POWER button.
To turn the device off, press and hold the POWER button
designed to protect your vehicle and give you
for three seconds.
mind.
Charging the device
You can charge the device with the included car charger,
or with a USB cable. The device will also run off of its own
internal battery for a short time.
Contents Include:
NOTE: When the Car charger is connected,
the device will automatically power on and
start recording video.
0 Dash Cam (not shown)
Battery: The battery in this unit is intended
to operate the unit after power loss due to an
accident or crash. Note that while recording may
continue, the device was not intended for long-
Manual
term recording on battery power.

Inserting and removing the Memory Card

Duty Suction Cup Mount Your camera comes with an 8GB Memory Card Preinstalled, but
it can be upgraded with up to 32GB with a different Memory
Card (not included.)
To remove the memory card, push the Memory card forward
gently until you hear a click, and the card should release.
cro SD Card
To insert a different memory card, orient the card with the
"bumpy edge" facing down and press it in until you hear a click,
then release.
te Lighter Adapter
4 English
Device Operation
CDR 810 Functions
Your Dash Cam
Video Record, Still Photo, and Playback Modes
The camera has four separate modes:
VGA
Video Mode
VGA
Still Photo Mode
VGA
Video Playback Mode
VGA
Still Photo Playback Mode
15
To toggle between the modes:
Press the MODE Button:
NOTE: You cannot switch
modes or enter menus
while the camera is
recording video.
1. Menu
2. Photograph/Playback
3. File Lock/Enter
Mode
Indicator
2
1 3
3
8
6 7 4 5
•
11.
12.
5
13.