Table of Contents
Advertisement
Operation
SAFETY FEATURES
continued
Lane Departure Warning
The Lane Departure Warning System (LDWS) provides audible and visual warnings as you approach
a lane boundary. It will indicate whether you are departing the lane to the left or to the right. Note that
this feature relies solely on analyzing video of the road ahead and, therefore, works best on clearly
marked roads with good visibility. This feature is for informational purposes only. See the Trademark
Acknowledgement, Warnings, and Regulatory Information section below for the full legal disclaimer for
using this feature.
Forward Collision Warning
The Frontal Collision Warning System (FCWS) provides audible and visual warnings if you are quickly
approaching an obstacle in the road ahead. Note that this feature relies solely on analyzing video of the
road ahead and therefore works best with good visibility. This feature is for information purposes only.
See the Trademark Acknowledgement, Warnings, and Regulatory Information section below for the full
legal disclaimer for using this feature.
Speed Alert
The Speed Alert system uses the GPS included in your camera to monitor your speed. In the ADAS
Settings menu, you can set a speed limit for yourself. If the camera detects that you are driving faster
than your pre-set speed limit, it will alert you with an audible tone and by flashing the alert on the camera
display.
15
Operation
GENERAL SETTINGS
Video Resolution:
Allows you to select the desired video resolution for loop recordings and emergency videos. Smaller (1 min)
files are easier to transfer to your phone and share.
Loop Clip Time:
Loop recordings and emergency videos can be saved in 1 min, 2 min, or 3 min clips depending on your
preference. Smaller (1 min) files are easier to transfer to your phone and share.
Wi-Fi:
Allows enabling/disabling WiFi connection on the device and viewing the camera's WiFi name and password.
GPS:
GPS can be disabled if needed. Enabling this setting allows your recordings to have an exact GPS location
stamped on the footage. This also always allows you to know the location of your vehicle if the camera is
wired via a hardwire kit and connected to a WiFi hotspot is installed in the car.
Bluetooth
:
®
Allows you to disable Bluetooth if needed. Bluetooth is enabled by default. Note: The camera will not be
able to connect to the Drive Smarter App if Bluetooth is disabled.
Display:
Setting allows you to choose the feeds that are displayed on the screen while the camera is powered.
Choose Front view, cabin view, or Picture in Picture (Front View and Cabin View).
Date / Time:
•
Enable "Automatic" mode to have date / time settings based on the camera's GPS signal. Having
the correct date and time ensures that timestamps associated with your videos are accurate. In
this mode, you will still have to ensure that you have picked the correct "Time Zone" and enabled
or disabled "Daylight Savings" based on your location.
•
To manually set the date and time, cursor down to "Manual", and select it. You will now be able to
enter Date and Time information.
Voice Commands:
Voice Commands can be toggled on/off in this setting.
Microphone:
The microphone can be enabled or disabled via settings or on the main screen. When disabled your
recorded videos will be silent.
16
Hide quick links:
Advertisement
Table of Contents
