Caution: Renumbering stack units may hinder management scripts and monitoring software that collect
data based on particular port traffic. Use renumbering with caution when monitoring ports and be aware
that scripts and monitoring parameters may need to be modified.
In this example there are two stack members numbered 1 and 3. To change Unit 3 to Unit 2, go to
System > Stack Management > Unit Configuration and select the Switch ID to change. Enter the new
Change Switch ID to
Switch ID into the
field and click Apply.
Click OK on the next screen. Allow a few minutes for the switch to renumber, then verify the new ID from
the System > Stack Management > Stack Summary screen.
51
Stacking Dell Networking Switches: N4032, N4032F, N4064, N4064F