To remove the switch from the configuration, go to the System > Stack Management > Unit Configuration
screen. Select the Switch ID of the switch to be removed, and then check the
at the bottom of the bottom of the screen.
Apply
Clicking
back to the Stack Summary screen to verify the switch was removed.
A backup of the configuration (copying the
> File Management > Copy Files is required to make the change persist after a reload.
49
Stacking Dell Networking Switches: N4032, N4032F, N4064, N4064F
deletes the removed switch from the stack configuration on the running-configuration. Go
running-configuration
Remove Switch
startup-configuration
to the
check box
) in System