NordicTrack A.C.T. Commercial Plus User Manual page 9

3. Identify the Frame Cover (54), and orient it as
shown. Slide the Frame Cover onto the Frame
(1), and press the posts on the Frame Cover into
the indicated holes in the Frame.
Next, orient the Upright (2) as shown. While a
second person holds the Upright near the Frame
(1), connect the Upper Wire Harness (81) to the
Lower Wire Harness (82).
Tip: Avoid pinching the Upper and Lower
Wires (81, 82). Gently pull the upper end of the
Upper Wire (81) to remove any slack while you
insert the Upright (2) into the Frame (1).
4. Identify the Left and Right Upright Covers (20,
21) and orient them as shown.
While a second person holds the Left and Right
Upright Covers (20, 21) near the Upright (2),
route the Right Extension Wire (80) through
the Right Upright Cover, and route the Left
Extension Wire (100) through the Left Upright
Cover.
Tip: Avoid pinching the Right and Left
Extension Wires (80, 100). Attach the Left and
Right Upright Covers (20, 21) around the Upright
(2) with four M4 x 30mm Screws (74).
Then, insert the Clip (85) onto the underside of
the Left and Right Upright Covers (20, 21).
3
Avoid pinching
the wires
Holes
4
74
20
100
85
9
81
2
81
54
82
1
Avoid pinching
the wires
80
2
21
74