NordicTrack A.C.T. Commercial Plus User Manual page 13

11. Identify the Right Rail Cover (93) and orient it as
shown. Press the Right Rail Cover into the Right
Outer Shield (17).
Next, identify the Right Rail Cover Cap (7), and
orient it as shown. Press the Right Rail Cover
Cap into the Right Rail Cover (93) and into the
Right Outer Shield (17).
Attach the Left Rail Cover (90) and the Left
Rail Cover Cap (6) in the same way.
12. Identify the Right Handlebar (11) and orient it as
shown.
See the inset drawing. While a second person
holds the Right Handlebar (11) near the Right
Handlebar Leg (13), connect the Right Extension
Wire (80) to the Right Control Grip Wire (92).
Insert the excess wire into the Right Handlebar
Leg.
Tip: Avoid pinching the wires. Attach the Right
Handlebar (11) to the Right Handlebar Leg (13)
with three M8 x 25mm Flat Screws (68). Then,
slide the Handlebar Cover (31) downward and
attach it with three M4 x 16mm Screws (67).
Attach the Left Handlebar (10) in the same
way.
11
16
90
6
7
12
10
13
93
17
13
92
11
80
Avoid pinching
the wires
13
31
68
67
11