Physical Characteristics - HP 5120 EI Series Datasheet

Data sheet | HP 5120 EI Switch Series
HP 5120 EI Switch Series
Specifications
I/O ports and slots

Physical characteristics

Dimensions
Weight
Memory and processor
Mounting and enclosure
Performance
1000 Mb Latency
10 Gb/s Latency
Throughput
Routing/Switching capacity
Routing table size
10
HP 5120-24G EI Switch (JE066A)
24 RJ-45 autosensing 10/100/1000
ports; Duplex: 10BASE-T/100BASE-TX:
half or full; 1000BASE-T: full only (IEEE
802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type
1000BASE-T)
4 dual-personality ports; autosensing
10/100/1000BASE-T or SFP
1 RJ-45 serial console port
17.32(w) x 11.81(d) x 1.72(h) in.
(44 x 30 x 4.36 cm) (1U height)
9.92 lb (4.5 kg)
128 MB SDRAM, 16 MB flash; packet
buffer size: 2 MB
Mounts in an EIA standard 19-inch
Telco rack or equipment cabinet
(hardware included)
< 3.2 μs
35.7 million pps
48 Gb/s
32 entries (IPv4)
HP 5120-48G-PoE+ EI Switch with 2
Interface Slots (JG237A)
48 RJ-45 autosensing 10/100/1000
PoE+ ports; Media Type: Auto-MDIX;
Duplex: 10BASE-T/100BASE-TX: half
or full; 1000BASE-T: full only (IEEE
802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type
1000BASE-T, IEEE 802.3at PoE+)
4 dual-personality ports; PoE
autosensing 10/100/1000BASE-T
or SFP
1 RJ-45 serial console port
2 port expansion module slots
Supports a maximum of 48
autosensing 10/100/1000 ports
17.32(w) x 16.54(d) x 1.72(h) in.
(43.99 x 42.01 x 4.37 cm) (1U height)
16.53 lb (7.5 kg)
128 MB SDRAM, 16 MB flash; packet
buffer size: 4 MB
Mounts in an EIA standard 19-inch
Telco rack or equipment cabinet
(hardware included)
< 3.2 μs
< 2.6 μs
142.9 million pps
192 Gb/s
32 entries (IPv4)
HP 5120-24G-PoE+ EI Switch with 2
Interface Slots(JG236A)
24 RJ-45 autosensing 10/100/1000
PoE+ ports; Duplex: 10BASE-T/100BASE-
TX: half or full; 1000BASE-T: full only
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type
1000BASE-T, IEEE 802.3at PoE+)
4 dual-personality ports; PoE
autosensing 10/100/1000BASE-T or SPF
1 RJ-45 serial console port
2 port expansion module slots
17.32(w) x 16.54(d) x 1.72(h) in.
(43.99 x 42.01 x 4.37 cm) (1U height)
15.43 lb (7 kg)
128 MB SDRAM, 16 MB flash; packet
buffer size: 2 MB
Mounts in an EIA standard 19-inch
Telco rack or equipment cabinet
(hardware included)
< 3.2 μs
< 2.6 μs
107.2 million pps
144 Gb/s
32 entries (IPv4)