Physical Characteristics - HP 2620 series Specifications

Data sheet | HP 2620 Switch Series
HP 2620 Switch Series
Specifications (Continued)
Ports

Physical characteristics

Dimensions
Weight
Memory and processor
Processor
Mounting
Performance
100 Mb Latency
1000 Mb Latency
Throughput
Routing/Switching capacity
MAC address table size
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
Altitude
Acoustic
8
HP 2620-48 Switch (J9626A)
48 autosensing 10/100 ports (IEEE 802.3 Type
10BASE-T, IEEE 802.3u Type 100BASE-TX);
Media Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T,
IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T);
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
17.44(w) x 10(d) x 1.73(h) in (44.3 x 25.4 x 4.39 cm) (1U height)
6.48 lb (2.94 kg), Fully loaded
Power PC FreeScale 8313 @ 400 MHz, 512 MB flash, 512 MB SDRAM,
4 MB flash ROM; packet buffer size: 2 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet
(hardware included); horizontal surface mounting only
IPv6 Ready Certified
< 8.3 µs (LIFO)
< 2.9 µs (LIFO)
up to 13.0 million pps
17.6 Gb/s
16000 entries
32°F to 131°F (0°C to 55°C)
15% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90%, noncondensing
up to 10,000 ft (3 km)
Power: 36.5 dB, Pressure: 24.5 dB
HP 2620-48-PoE+ Switch (J9627A)
48 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type
10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+);
Media Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T,
IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T);
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
17.44(w) x 14.5(d) x 1.73(h) in (44.3 x 36.83 x 4.39 cm) (1U height)
11.53 lb (5.23 kg), Fully loaded
PowerPC FreeScale 8313 @ 400 MHz, 512 MB flash, 512 MB SDRAM,
4 MB flash ROM; packet buffer size: 2 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet
(hardware included); horizontal surface mounting only
IPv6 Ready Certified
< 8.3 µs (LIFO)
< 2.9 µs (LIFO)
up to 13.0 million pps
17.6 Gb/s
16000 entries
32°F to 131°F (0°C to 55°C)
15% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90%, noncondensing
up to 10,000 ft (3 km)
Power: 34.0 dB, Pressure: 25.3 dB