Table of Contents
Advertisement
Troubleshooting Guide
The messages shown below display your
systems condition.
TOC Error:
The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.
➪ Clean the CD and load it correctly.
E-05:
The CD is upside-down.
➪ Load the CD correctly.
Mecha Error:
The unit is malfunctioning for some reason.
➪ Press the reset button on the unit. If the
"Mecha Error" code does not disappear,
consult your nearest service center.
NO NAME:
Attempted to display DNPS during the CD
play having no disc names preset.
Reading:
The unit is reading the data on the disc.
indicator is blinks:
The CD player section is not operating
properly.
➪ Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center.
Unsupported: A MP3/WMA is played with a format that
this unit can't support.
➪ ----
Protected:
A copy-protected file is played.
➪ ----
26
|
English
Advertisement
Table of Contents
