Surround Fx - Hyundai EXCELLENCE H-CMD2002 Instruction Manual

Subwoofer: set up the subwoofer: Large (subwoofer is employed), None (subwoofer is not employed).
Center: set up the center speaker: Large (suitable for speaker with good bass output), Small (for speaker with
bad bass output), None (center speaker is not employed).

Surround FX

Pro Logic II is a dramatically improved matrix surround system based on the original Dolby Pro Logic system. In
the case of Pro Logic, there were four channels: front left, center and front right, plus a mono surround channel
that was usually split between two rear speakers. Compared to DPL, DPL II offers two full-range stereo surround
channels, more sophisticated steering logic, high channel separation and an exceptionally stable sound field. DPL
II uses a simple servo circuits used to derive the five channels. And, unlike the synthetic Jazz club, Hall and
Stadium modes found on many AV receivers, DPL II introduces no phony delay-induced echoes, reverb, or tonal
coloration.
Surround mode: select the surround sound effect: Off (playback as the original audio output), Surround I (using
the DPL as the decoding method), Surr matrix (from mono output to surround effect), Surr movie (enhance
movie surround effects), Surr music (surround music effects).
1. Enter the Surround FX menu.
2. Use the buttons on the panel or 8/
the desired item on the screen to select the settings: Surround mode,
Panorama, Dimension ctrl, Center width ctrl.
3. Press the buttons on the panel or 9/: buttons on the RC or touch
the desired button on the screen to enter the list of values.
4. Press the buttons on the panel or 8/
the desired button on the screen to select the desired value.
5. Press PLAY/PAUSE button to confirm.
62
buttons on the RC or touch
buttons on the RC or touch