Table of Contents
Advertisement
Programming tuner stations
You can store up to a total of 36 radio stations in the memory (24 FM, 12 AM), manually or automatically.
To store a station:
-
Select a band (if needed)
-
Select a station by
-
Hold a Preset button (1-6) that you want store the station for at least 2 seconds.
To recall a station:
-
Select a band (if needed)
-
Press a Preset button (1-6) briefly to recall the stored station
AMS (Auto Memory Store) function
Select the band. Long press TA button on the joystick or press AS button on the touch screen to tune all the radio
stations in range from the current frequency, and auto store 6 radio stations with the strongest radio signals in P1
to P6 respectively according to frequency from low to high.
The search will stop when it makes the hole loop. To stop auto store, press AS button again.
Preset scan
Short press button 1 to 6 on the remote control or press P1 - P6 on the touch screen to load the preset radio
stations from P1 to P6 for playback. Buttons 1 to 6 corresponds to station P1 to P6.
Short press TA button of joystick or PLAY/PAUSE button on the remote control, searching all the radio stations
in range from the current frequency, playing the station for 10 seconds once a radio station is located and
continue to search.
Press other tuning function buttons to cease the radio scan tuning.
buttons
33
Advertisement
Chapters
Table of Contents
