Table of Contents
Advertisement
Available languages
Available languages
displayed on the display:
1 2 3 4
5
7 8 9 10
11
12
1. PTY button. Touch to enable/disable PTY
function. In the PTY list, touch a program type
to start its search.
2. TA button. Touch to enable/disable TA
function.
3. AF button. Touch to enable/disable AF
function.
4. ST button. Touch to select stereo/mono
reception mode.
5. Current band and frequency.
6. Preset station button. Touch to select the
station. Touch and hold to save the current
frequency under the preset number.
7. LOC button. Touch to select local/distant
station reception.
8. Mute button; touch to switch sound on/off.
9. Volume down button. Touch to decrease
volume.
10. Volume level.
11. Volume up button. Touch to increase
volume.
12. BAND button. Touch to select bands.
13. AS/PS button. Touch to scan all saved
stations in current band. Touch and hold to find
and save 6 availble stations in current band.
14.
button. Touch for automatic search of
the nearest station downwards.
15.
button. Touch repeatedly to change
frequency step by step downwards.
16.
button. Touch repeatedly to change
frequency step by step upwards.
17.
button. Touch for automatic search of
6
13
14
15
16
17
the nearest station upwards.
Band selection
Press BAND/RDM button on the RC to
switch to the bands in the following order: FM1
- FM2 - FM3 - MW1 - MW2.
Manual/automatic tuning
• Manual tuning: press
the panel or SEEK-/
RC and hold for 2 seconds to enter the manual
tuning mode. Press these buttons repeatedly to
select a frequency downward or upward step
by step.
• Automatic tuning: press
on the panel or SEEK-/
the RC, the automatic search will start. It will
play when finds the station.
Programming tuner stations
There are 6 numbered preset buttons on
the RC, with which you can store and recall
stations for each band (18 FM, 12 MW). Select
a station, then press and hold a preset button.
The station will be saved in the memory under
the corresponding number. To recall a stored
station, press the corresponding preset button.
Auto memory store/Preset scan
Auto store: Select a band, press and hold
P.SCN/RPT button on the RC to enter auto
store mode. The radio will automatically store 6
stations to the 6 preset memories of the current
band. To stop auto store, press the button again.
During auto station preset, the unit will
search and store stations with the strong signal
first, and then weaker signal stations until the
memories are full.
Preset scan: Select a band, press P.SCN/
RPT button on the RC to scan all preset
stations in the memories of the current band.
To stop preset scan, press the button again.
RDS background
RDS service availability varies with areas.
Please understand if RDS service is not
Operation
/
buttons on
and SEEK+/
on the
/
buttons
and SEEK+/
on
15
Advertisement
Chapters
Table of Contents
