Vertex Standard EVX-531 Operating Manual page 18

d W
ual atch
The Dual Watch feature is similar to the SCAN fea-
ture, except that only two channels are monitored:
 The current operating channel; and
 The Priority-2 channel.
To activate Dual Watch:
 Press (or press and hold) the assigned Program-
mable key.
 The scanner will search the two channels; it will
pause each time it finds a channel on which some-
one is speaking.
To stop Dual Watch:
 Press (or press and hold) the assigned Program-
mable key.
 Operation will revert to the "Dual Watch Revert"
channel.
16
a o
dvancEd pEratIon
Fm s
The FM Scan feature checks a User-assigned Priority
Channel regularly as you scan other channels. Thus,
if only Channels 1, 3, and 5 (of the 8 available chan-
nels) are designated for "Scanning", the user may
nonetheless assign Channel 2 as the "User-assigned"
Priority Channel via the FM Scan.
To activate FM Scan, first select the channel you want
to designate as the "User-Assigned Priority Channel"
and press (or press and hold) the assigned program-
mable key. Then rotate the CH Selector knob to re-
call to the "Scanning Start" channel which has been
programmed by your dealer to activate the scanner.
When the scanner stops on an "Active" channel, the
User-assigned Priority Channel will automatically be
checked every few seconds; if activity is found on the
User-assigned Priority Channel, the radio will switch
between it and the Dealer-Assigned Priority Channel,
if any.
( F
-m s
can olloW E can
EVX-531 O
pErating
)
M
anual