Vertex Standard EVX-531 Operating Manual page 17

prI-2 s
Et
Press (or press and hold) the assigned programmable
key to toggle the current channel to the priority chan-
nel 2 "enable" and "disable".
prI-2 d
IsaBlE
Press (or press and hold) the assigned programmable
key to disable the priority channel 2 of the group tem-
porarily.
s
can
The Scanning feature is used to monitor multiple
signals programmed into the transceiver. While scan-
ning, the transceiver will check each channel for the
presence of a signal, and will stop on a channel if a
signal is present. EVX-531 can scan both digital and
analog frequency programmed channels simultane-
ously.
To activate scanning:
 Press (or press and hold) the assigned Program-
mable key to activate scanning: the LED indicator
will glow with a pre-defined color.
 The scanner will search the channels of each
channel, looking for active ones; it will pause
EVX-531 O M
pErating
a
dvancEd
anual
o
pEratIon
each time it finds a channel on which someone is
speaking.
 Press (or press and hold) the assigned Program-
mable key again to disable scanning. Operation
will revert to the programmed revert channel.
Note: Your dealer may have programmed your radio
to stay on one of the following channels if you press
the PTT switch during scanning pause:
 "Scan Pause" channel ("Talk Back")
 "Last Busy" channel
 "Priority-2" channel
 "User Programmed" channel ("Select Channel")
 The channel which defined in the CH Selector
knob.
g s
roup can
The Scanning feature is used to monitor multiple
channels programmed into the transceiver. While
scanning, the transceiver will check each channel of
the programmed group for the presence of the signal,
and will stop on a channel if a signal is present.
Press (or press and hold) the assigned programmable
key to activate the scanning on the selected groups.
15