Hot Surface Indicator Lights; Cooling Fan; Control Lockout; Cook And Warm Element - Jenn-Air ELECTRIC TOUCH CONTROL COOKTOPS Use & Care Manual

U Y C
SING OUR OOKTOP
On Indicators
All Models - The LOW light will illuminate when the element
is on.
Hot Surface
Indicator Lights
A Hot Surface light is located next to each element. The light
will illuminate when the cooking area is hot. It will remain on,
even after the control is turned off, until the area has cooled.

Cooling Fan

A cooling fan will automatically turn on when any element is
turned on. The fan is used to keep internal parts inside the
cooktop cool. The fan will automatically turn off when all the
elements are off. With heavy use, the fan may continue to run
after the controls are turned off until the cooktop has cooled.

Control Lockout

The touchpad controls can be locked out for cleaning and to
prevent unwanted use.
To lock controls:
Press and hold the All-Off/Lock pad for three seconds.
To unlock controls:
Press and hold the All-Off/Lock pad for three seconds. The
All-Off/Lock light will illuminate whenever the controls are
locked.

Cook and Warm Element

The Cook and Warm Element, located in the left rear position,
is a fully-functioning element that provides an Ultra Low/
Warm heat setting for holding delicate sauces and keeping
cooked foods warm.
To use the Warm setting, touch ON, and then touch Ultra
Lo/Warm on the Temperature Selector Bar.
To use the regular t8 0 0 18 12e Temp820 Twm
O91.643 m4e Temp820ement 6OW
5