First Installation; Remote Control; Connection - Loewe XELOS A 42 Operating Instructions Manual

First installation

Remote control

Batteries
To insert or change the batteries, press on the arrow. Slide the battery
compartment cover downwards and remove it. Insert LR 03 alkaline-
manganese batteries (AAA) and ensure that the + and - ends are positioned
correctly.
Then push the cover back on from the bottom.
Note on disposing batteries:
The batteries provided contain no harmful materials such
as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that
batteries may no longer be thrown out with the
household rubbish. Deposit any used batteries free of
charge into the designated collection containers set up at
commercial businesses.
Setting up the remote control for operating the TV
Push the TV button.
TV
How to operate other Loewe equipment is described on page 39.
12

Connection

Power mains
Remove the cover for the connections.
Connect the TV set to a 220-240V/50- 60 hertz power outlet. For Xelos A
26/32/37, plug the small plug of the mains cable into the mains socket on
the rear of the TV set; plug the large mains plug into a mains socket.
Antennas
+
Plug the antenna plug of your antenna/cable system or the room antenna
for DVB-T into the ANT-TV socket (Tuner 1 for Xelos A 32/37/42).
+
220-240V~
ANT-TV ANT-SAT 50/60Hz
220-240V~
50/60Hz?
ANT-TV ANT-SAT
TV
R
Xelos A 26
Xelos
A 32/37/42