D-Link xStack DES-3500 Series Manual page 30

Command: config ports 1-3 speed 10_full learning enable
state enable
Success.
DES-3526:admin#
show ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the configuration of all ports on a standalone switch:
DES-3526:admin#show ports
Command: show ports
Port State/
MDIX
----- ---------- --------------------- ---------------------
1 Enabled
Auto
2 Enabled
Auto
3 Enabled
Auto
4 Enabled
Auto
5 Enabled
Auto
6 Enabled
Auto
7 Enabled
Auto
8 Enabled
Auto
9 Enabled
Auto
10 Enabled
Auto
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
Used to display the current configuration of a range of ports.
show ports [<portlist>] {description | err_disabled}
This command is used to display the current configuration of a
range of ports.
<portlist> − Specifies a port or range of ports to be displayed.
{description} – Adding this parameter to the show ports command
indicates that a previously entered port description will be included
in the display.
{err_disabled} – Use this to list disabled ports including connection
status and reason for being disabled.
None.
Settings
Speed/Duplex/FlowCtrl Speed/Duplex/FlowCtrl
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Connection
Link Down
Link Down
Link Down
Link Down
Link Down
Link Down
Link Down
Link Down
100M/Full/None
Link Down
26
Address Trap
Learning State
-------- --------
Enabled Enabled
Enabled Enabled
Enabled Enabled
Enabled Enabled
Enabled Enabled
Enabled Enabled
Enabled Enabled
Enabled Enabled
Enabled Enabled
Enabled Enabled