D-Link xStack DES-3500 Series Manual page 256

config admin local_enable
Description
Parameters
Restrictions
Example usage:
To configure the password for the "local_enable" authentication method.
config authen enable_admin
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the enable admin command.
DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
This command will configure the locally enabled password for the
enable admin command. When a user chooses the "local_enable"
method to promote user level privileges to administrator privileges,
he or she will be prompted to enter the password configured here
that is set locally on the Switch.
<password 15> - After entering this command, the user will be
prompted to enter the old password, then a new password in an
alphanumeric string of no more than 15 characters, and finally
prompted to enter the new password again for confirmation. See the
example below.
User Account Command Level – Administrator.
DES-3526:admin#config admin local_enable
Command: config admin local_enable
Enter the old password:
Enter the case-sensitive new password:******
Enter the new password again for
confirmation:******
Success.
DES-3526:admin#
Used to config whether to allow the user to do enable_admin
command based on the method that this user has been
authenticated.
config authen enable_admin [tacacs|xtacacs|tacacs+ |radius
|local |none | all ] state [enable| disable]
Used to config whether to allow the user to do enable_admin
command based on the method that this user has been
authenticated. By default, the user can do the enable admin
command for all methods.
all – Don't care the authentication method.
tacacs - The user is admitted via tacacs authentication.
xtacacs - The user is admitted via xtacacs authentication.
tacacs+ - The user is admitted via tacacs+ authentication.
radius - The user is admitted via RADIUS authentication.
local - The user is admitted via local authentication.
none - The user is admitted without authentication.
state - Enable: allow the user to do enable admin under the
specified authentication method.
Disable: do not allow the user to do enable admin under the
specified authentication method.
Only Administrator - level users can issue this command.
DES-3526:admin# config authen enable_admin
radius state disable
Command: config authen enable_admin radius
252