Sony Cyber-shot DSC-HX400 Help Manual page 145

When the desired access point is displayed on the screen: Select the desired access
point.
When the desired access point is not displayed on the screen: Select [Manual Setting]
and set the access point.
*
For the input method, refer to "How to use the keyboard."
If you select [Manual Setting], input the SSID name of the access point, then select the
security system.
3. Input the password, and select [OK].
Access points without the
4. Select [OK].
How to use the keyboard
When manual character entry is required, a keyboard is displayed on the screen.
1. Input box The characters you entered are displayed.
mark do not require a password.
135