Sending Images To An Android Smartphone (Nfc One-Touch Sharing) - Sony Cyber-shot DSC-HX400 Help Manual

has permission to connect. If you want to change the device that is permitted to connect to
the product, reset the connection information by following these steps. MENU → [Wireless]
→ [SSID/PW Reset]. After resetting the connection information, you must register the
smartphone again.
When [Airplane Mode] is set to [On], you cannot connect this product and the smartphone.
Set [Airplane Mode] to [Off].
How to Use Using Wi-Fi functions
Sending images to an Android smartphone (NFC One-
touch Sharing)
With just one touch, you can connect this product and an NFC-enabled Android smartphone,
and send an image displayed on the product screen directly to the smartphone.
1. Activate the NFC function of the smartphone.
2. Display a single image on the product.
3. Touch the smartphone to the product.
The product and the smartphone are connected, and PlayMemories Mobile automatically
launches on the smartphone, and then the displayed image is sent to the smartphone.
Before you touch the smartphone, cancel the sleep and lock-screen functions of the
smartphone.
The NFC function is available only when the
Touch the smartphone to the product for 1-2 seconds until PlayMemories Mobile
launches.
Transferring images to a Smartphone
(N mark) is displayed on the product.
130