Using Speed Dialing - Canon imageCLASS MF6500 Series Basic Manual

Using Speed Dialing

Follow the procedure below to send faxes to registered recipients using speed dialing.
For easy reference, print out the list of recipients registered for speed dialing. (See
"REPORT SETTINGS," on p. 12-23.)
● Using One-Touch Speed/Group Dialing
2
4
1
Place the document on the platen glass or load it in the ADF.
2
Press [FAX].
3
Adjust any necessary settings for your document.
For details, see "Scan Settings," on p. 4-3.
4
Press the desired one-touch speed or group dialing key (01 to 23).
If you pressed a wrong key, press [Clear] and try again.
5
Press [Start] to dial the number.
When you set the documents on the platen glass, press [
size, then press [Start] for each document. When scanning is complete, press [OK] to start dialing.
] or [ ] to select the document
5
4-32