Canon imageCLASS MF6500 Series Basic Manual page 148

FAX SETTINGS (MF6550 Only)
7. OFFHOOK ALARM
8. STANDARD SETTINGS
1. DENSITY
2. IMAGE QUALITY
3. DIRECT TX
9. INIT. FAX STD SET
3. TX SETTINGS
1. ECM TX
2. PAUSE TIME
Sets whether the alarm sounds when the handset of the
external telephone is off the hook.
– ON
– OFF
Sets the default setting for faxing.
Sets the default density for faxing.
– STANDARD
– DK
– LT
Sets the default image quality for faxing.
– FINE
– PHOTO
– SUPER FINE
– ULTRA FINE
– STANDARD
Sets whether to use <DIRECT TX> as default.
– OFF
– ON
Sets whether to restore <STANDARD SETTINGS> in <FAX
SETTINGS> to the default.
– OFF
– ON
Sets the transmission functions.
Sets whether the ECM (Error Correction Mode) transmission
is activated.
– ON
– OFF
Sets the pause time when you insert pause into the dialing
sequence. (1SEC-15SEC)
12-12