Canon imageCLASS MF6500 Series Basic Manual page 150

FAX SETTINGS (MF6550 Only)
3. INCOMING RING
OFF
ON
RING COUNT
4. REMOTE RX
ON
REMOTE RX ID
OFF
5. MANUAL/AUTO
OFF
ON
F/T RING TIME
Sets whether the machine rings when it receives a voice
call, enabling you to answer the call. This function is only
available when <RX MODE> is set to <FaxOnly> or
<FaxTel>.
The telephone does not ring when it receives a voice call. (In
Sleep mode, the telephone may ring one or two times.)
The telephone rings when it receives a voice call if an
external telephone is connected.
Sets the number of incoming rings before the machine
answers. (1TIMES-99TIMES)
Sets whether to use remote receiving. This function is not
available when <ENERGY IN SLEEP> in <COMMON
SETTINGS> is set to <LOW>. (See Chapter 1, "Advanced
Fax Features (MF6550 Only)," in the Advanced Guide.)
The machine enables remote receiving.
You can dial a code on remote extension to start receiving a
document.
A combination of two characters using 0 to 9, * and # is
possible.
The machine disables remote receiving.
Sets whether the machine switches to document receive
mode after an external telephone rings for a specified length
of time in manual receive mode.
An external telephone keeps ringing until someone answers
the call manually.
The machine switches to document receive mode after an
external telephone rings for a specified time.
Sets the length of time to elapse before the machine
switches to document receiving. (1SEC-99SEC)
12-14