Toshiba XD-E500KC Owner's Manual page 31

View Mode
DVD
The user may select one of the following options:
Fill: Fill the screen with decoded image.
Original: Display image as it original size. "Original" is
preferred for Jpeg viewing.
Auto Fit: Automatically fit the decoded image on screen
without distortion.
Pan Scan: Automatically display decoded image on full
screen without distortion.
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the / button to select
View Mode.
4) Press ENTER
Aspect Ratio
button, then use
the / button to
Video out
select the options
(Fill, Original, Auto HDMI Resolution
Fit or Pan Scan). JPEG Interval
5) Press ENTER
PICTURE
button.
6) Press SETUP
button to exit the menu.
Pan Scan
Select when a standard 4:3 TV is
connected. Displays pictures cropped
to fill your TV screen. Either or both sides
of the picture are cut off.
Auto Fit
Automatically fit the decoded image on
screen without distortion. Black bars will
be present on top/bottom or left/right of
screen.
Note: Depending on the DVDs, you may not be able to view
the mode as selected.
Video Output
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the / button to select
Video out.
4) Press ENTER button, then use the / button to select
the output mode (Component, S-VIDEO, P-Scan or HDMI).
5) Press ENTER
button.
Aspect Ratio
6) Press SETUP
button to exit the
menu.
Video out
Component:Select if
HDMI Resolution
you connect the DVD to
JPEG Interval
your TV which has
component video PICTURE
inputs.
S-VIDEO: Select if you
connect the DVD to your TV via S-video input.
P-Scan: Select if you connect the DVD to your TV which has
component video inputs that support progressive scan.
HDMI: High Definition Multimedia Interface. Select if you connect
the DVD to TV via HDMI input.
HDMI Resolution
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the
HDMI Resolution.
4) Press ENTER button, then use the
the options (Auto, 480p/576p, 720p, 1080i, 1080p or
1080p/24F).
5) Press ENTER
button.
6) Press SETUP
button to exit the
menu.
: 4 : 3
Notes
• If the Video Output is not set to "HDMI", you cannot select
the "HDMI Resolution".
: SHARP
• Select the HDMI resolution according to the performance
of the connected TV.
JPEG Interval
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the
JPEG Interval.
4) Press ENTER button, then use the
and change the JPEG Interval.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Off: Plays back one file at a time.
5 seconds: Plays back images in the form of a slide show
at 5 seconds interval.
10 seconds: Plays back images in the form of a slide show
at 10 seconds interval.
15 seconds: Plays back images in the form of a slide show
at 15 seconds interval.
: 4 : 3
: Original
S-VIDEO
PICTURE
P-Scan
HDMI
1) Press SETUP button.
2) Press / button to select Video.
3) Press button, then use the
PICTURE.
4) Press ENTER button, then use the
picture mode (SHARP, COLOR, CONTRAST or OFF).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
/ button to select
/ button to select
Aspect Ratio : 4 : 3
: Original
Auto
Video out
480p/576p
HDMI Resolution
720p
1080i
JPEG Interval
1080p
PICTURE
/ button to select
/ button to shift
Aspect Ratio : 4 : 3
: Original
: 480P/576P
Video out
Off
HDMI Resolution
5 seconds
JPEG Interval
10 seconds
15 seconds
PICTURE
/ button to select
/ button to select
31