Call Using A Speed Dial Number; Call Using Abbreviated Dialing Features - Kyocera Durashok User Manual

Call Using a Speed Dial Number

You can store up to 98 numbers in your phone's speed dial memory to make contacting friends
and family easier.
You must have already assigned a speed dial number to an existing phone number. See
Speed Dial Numbers.
To use speed dial for locations 2-9:
From standby mode, press and hold the appropriate key for approximately two seconds.
n
To use speed dial for locations 10-99:
From standby mode, enter a two-digit speed dial number, and then press
n
The display confirms that the number has been dialed when it shows "Connecting..."

Call Using Abbreviated Dialing Features

Abbreviated Dialing is similar to speed dialing. You can use either of the following abbreviated
dialing features.
Contacts Match - Retrieve any number saved in your Contacts by entering four or more digits of
n
any part of the number.
Prepend - Prepend the first five or six digits (for example, the area code and prefix) to any four or
n
five digits you enter.
To activate the Prepend feature:
1. Press
> Settings > Others > Call Setup > Abbrev. Dial.
2. Select Prepend > On.
3. Enter a five- or six-digit number and press
To place a call using Abbreviated Dialing:
1. Enter the four or more digits of any part of a Contacts entry's phone number to use the Contacts
Match feature.
– or –
Enter the last four or five digits of the number to use the Prepend feature.
Note: Contacts Match will not retrieve numbers if you enter 911 or reserved three-digit service
numbers such as 411 or 711.
Phone Calls & Settings
.
Assign
.
18