ALCON -7 Operation Manual page 9

{BETWEEN REMOTE/ MOBILE UNIT AND BASE UNIT}
A : Remote / Mobile CALLING BASE UNIT
Remote / Mobile
Note :
l l If you press INTERCOM without picking up the handset of the normal telephone and the Base unit
user picks up their handset, the Remote/Mobile unit will emit a quick beeping sound.
B : BASE CALLING REMOTE / MOBILE UNIT
2
INTERCOM FUNCTION
1. Press INTERCOM. The base will emit two short
"beeps".
The Remote/Mobile unit INT indicator will begin to flash.
2. Lift the telephone handset and wait for somebody to
activate the Base Unit.
Once the Base unit is in use, the INT indicator will
continuously illuminate.
3. To finish the conversation, return the handset to the Base
unit.
Base Unit
1. The base unit will ring.
The INT and CALL indicator will illuminate and the repre-
sentative no. of Remote/ Mobile (no.1) unit will flash.
2. Press any key or lift the receiver from the base unit to
answer the call.
The INT, CALL, and dialing buttons will
illuminate during the conversation.
3.To finish the conversation, press CALL or return the
receiver to Base unit and hang up the telephone handset
of Remote/ Mobile unit.
Base Unit
1. Press CALL.
The CALL indicator will illuminate.
2. Press digit No. 1 (this represents the Remote/ Mobile
unit).
The CALL indicator will illuminate and digit No.1will flash.
The CALL and the digit button no. 1 will continuously
1
illuminate during the conversation call.
9