Redial Function; Hold Function - ALCON -7 Operation Manual

You can redial the last telephone number dialed automatically {after getting a busy signal, for
1
Remote/ Mobile Unit
It depends on whether the telephone set that is being used with the Remote/Mobile Unit has this
function.
NOTE:
When you push
the conversation.
You can hold a call during the conversation.
2
Remote/ Mobile Unit
It depends on whether the telephone set that is being used with the Remote/Mobile Unit has this
function.
NOTE:
When you push
the conversation.

REDIAL FUNCTION

instance}
Base Unit
1. Pick up the receiver of the base unit or press
dial tone.
2
2. Press REDIAL.
to talk, the telephone line will remain busy if you do not push it again after ending

HOLD FUNCTION

Base Unit
1. Press HOLD to place a call on hold.
1
2. Pick up the handset from the base unit or press to
contiue the coversation.
to talk, the telephone line will remain busy if you do not push it again after ending
The TEL key will illuminate. If you use,
as well.
The last telephone number dialed from the
handset will be dialed out automatically.
The person who is on the other side of the
conversation will hear an on-hold melody. The
TEL key will flash.
The TEL key will illuminate. { If using
well }.
12
to get a
it will illuminate
,it will illuminate as