Transferring Calls - ALCON -7 Operation Manual

NOTE :
l When the distance between Remote/ Mobile unit and Base unit is too far, the INT indicator will flash
several times without ringing.
3
Remote/ Mobile unit
1. The Remote/ Mobile unit will ring.
2. Once you lift the telephone handset, you can begin you
3. To finish the conversation, press CALL or hang up the

TRANSFERRING CALLS

FROM BASE UNIT TO Remote/Mobile
{Base Unit Answering or Placing a Call}
Base Unit
1. Press HOLD.
1
2. Press CALL.
2
3. Press the digit button no. 1 to call the Remote/ Mobile
Remote/Mobile
1.The Remote/ Mobile unit will ring.
2.Pick up the telephone handset to begin the conversation.
3.To hand up, press CALL or return the telephone handset.
4.The Remote/ Mobile unit can answer the call that is on
The INT indicator will flash. This means that the Base unit
is calling the Remote/ Mobile unit.
conversation .
The INT indicator will continuously illuminate.
telephone handset of Remote/ Mobile unit.
The call will be put on hold automatically.
The CALL indicator will illuminate.
unit.
The digit button no. 1 will flash and that means the
Remote/ Mobile unit is being called. Remote/ Mobile Unit
The INT indicator will flash and the telephone set will ring.
The INT indicator will illuminate during the conversation.
The Base unit will return to Standby mode.
The TEL indicator on the Base unit will flash.
hold.
The Remote/Mobile unit TEL indicator will illuminate.
10