Placing A Call - ALCON -7 Operation Manual

RINGER VOLUME CONTROL
VOLUME CONTROL
SCRAMBLE FUNCTION
To prevent somebody from eavesdropping on your conversation, use the Scramble function. .
NOTE :
If there is blackout when the system had the Scramble Function engaged or disengaged, the system
will always return to that setting when the power returns.
The system should be in standby mode to engage or disengage the scramble function.
Remote / Mobile UNIT
Switch the Remote/ Mobile unit ON (the POWER indicator should illuminate), making sure that
RINGER ON/OFF SWITCH

PLACING A CALL

Set the RINGER switch on the middle right side
of the base unit to ON (up) or OFF (down).
1. Press the Scrambler button located on the
front of the remote unit to engage the
scramble function. When the SCRAM
indicator is illuminated, the scramble
function has engaged.
2. Press the Scramble button again to disengage
the scramble function. When the SCARM
indicator is not illuminated, the scramble
function has been disengaged.
the telephone cord is plugged into the house
socket.
1. Pick up the telephone handset of the normal
telephone and check if there is dial tone.
The TEL indicator will illuminate.
2. Dial the number you wish to call.
3. Hang up the handset when you have finshed
the call.
7