Audio Controller - Gigabyte GA-H97M-HD3 User Manual

BIOS routes the sharable ports to EHCI controller. Then it uses ACPI protocols to
Auto
provide an option to enable the xHCI controller and reroute the sharable ports. Note:
This is the recommended mode when BIOS does NOT have xHCI pre-boot support.
All shared ports are eventually routed to the xHCI controller during the BIOS boot process.
Enabled
If BIOS does not have pre-boot support for the xHCI controller, it should initially route
the sharable ports to the EHCI controller and then prior to OS boot it should route the
ports to xHCI controller. Note: OS has to provide support for the xHCI controller in this
mode. If the OS does not provide support, all sharable ports won't work.
The USB 3.0 ports are routed to the EHCI controller and the xHCI controller is turned
Disabled
off. All USB 3.0 devices function as High Speed devices regardless of xHCI software
support/availability.
& Audio Controller
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
& Intel Processor Graphics
Enables or disables the onboard graphics function. (Default: Enabled)
& Intel Processor Graphics Memory Allocation
Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M)
& DVMT Total Memory Size
Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX.
(Default: MAX)
& Intel(R) Rapid Start Technology
Enables or disables Intel
®
& Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
& XHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support. (Default: Enabled)
& EHCI Hand-off
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support. (Default: Disabled)
& USB Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
& Two Layer KVM Switch
Set to Enabled to ensure proper device functionality when chaining two KVM switches. (Default: Disabled)
& OnBoard LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
Rapid Start Technology. (Default: Disabled)
- 28 -