Warning Lamps And Indicators; Engine Coolant Temperature Gauge; Fuel Gauge; Battery Warning Lamp - Ford Kuga Owner's Manual

Engine Coolant Temperature
Gauge
WARNING
Never remove the coolant reservoir
cap while the engine is running or hot.
At normal operating temperature, the
needle will remain in the center section.
Note: Do not restart the engine until the
cause of overheating has been resolved.
If the needle enters the red section, the
engine is overheating. Stop the engine,
switch the ignition off and determine the
cause once the engine has cooled down.
See Engine Oil Check (page 188).

Fuel Gauge

Switch the ignition on. The fuel gauge will
indicate approximately how much fuel is
left in the fuel tank. The fuel gauge may
vary slightly when your vehicle is moving
or on a gradient. The arrow adjacent to the
fuel pump symbol indicates on which side
of the vehicle the fuel filler door is located.
WARNING LAMPS AND
INDICATORS
The following warning lamps and
indicators will alert you to a vehicle
condition that may become serious. Some
lamps will illuminate when you start your
vehicle to make sure they work. If any
lamps remain on after starting your vehicle,
refer to the respective system warning
lamp for further information.
Note: Some warning indicators appear in
the information display and function the
same as a warning lamp but do not display
when you start your vehicle.
Kuga (CBS) Vehicles Built From: 10-03-2014, Vehicles Built Up To: 31-12-2014, CG3585en enGBR, Edition date: 02/2014, None
Instrument Cluster
Anti-Lock Braking System Warning
Lamp
to have the normal braking system
(without anti-lock braking system) unless
the brake system warning lamp is also
illuminated. Have your vehicle checked by
an authorized dealer.
Automatic High Beam Lamp
Equipped)

Battery Warning Lamp

equipment. Have your vehicle checked by
an authorized dealer immediately.
Blind Spot Monitor Indicator
Equipped)
Information System (page 153). See
Information Messages (page 74).

Brake System Warning Lamp

64
If it illuminates when you are
driving, this indicates a
malfunction. You will continue
It will illuminate when this
feature is on. See Automatic
High Beam Control (page 51).
If it illuminates when driving, this
indicates a malfunction. Switch
off all unnecessary electrical
It will illuminate when you switch
this feature off or in conjunction
with a message. See Blind Spot
It will illuminate when you
engage the parking brake with
the ignition on.
(If
(If