Ford Kuga Owner's Manual page 215

Note: You can use the wheel brace to raise
and lower the jack.
Assembling the Wheel Brace
Type One
WARNING
The screw-in towing eye has a
left-hand thread. Turn it
counterclockwise to install it. Make
sure that the towing eye is fully tightened.
Insert the screw-in towing eye into the
wheel brace.
Kuga (CBS) Vehicles Built From: 10-03-2014, Vehicles Built Up To: 31-12-2014, CG3585en enGBR, Edition date: 02/2014, None
Wheels and Tires
Type Two
Note: When jacking your vehicle, you will
need to rotate the wheel brace 180 degrees,
pivot the wheel brace back to the original
position before rotating again.
Using the Wheel Brace as a Jack Handle
1.
2. Rotate the wheel brace 180 degrees.
3. Return the wheel brace to the original
Removing the Wheel Trim
Type One
1.
2. Remove the wheel trim.
213
Attach the wheel brace to the jack
horizontally.
position and repeat as necessary.
Insert the wheel trim remover.